IECEx Approved Thermocouples for the Petrochemical, Oil and Gas Industries
with Termination Entry Gland and Fixed Process Thread
Send Enquiry
Data Sheet
Request Info
Also available with ATEX Approval Also available with EAC Ex Approval
Also available with ATEX Approval Also available with EAC Ex Approval
Our IECEx approved semi rigid mineral insulated thermocouple assemblies are manufactured using material that conforms to IEC 61515. Due to the nature of the cable used, the sheaths can be bent and formed without affecting performance.
- The following thermocouple types are available: K, T, J, N, E, R, S and B
- A wide range of protection concepts are available for use in Zones 0, 1 & 2. See table below for details
- For stand-off requirements (Temperature classification T6-T1), see here
- Available in 1.0mm, 1.5mm, 2.0mm, 3.0mm, 4.5mm, 6.0mm & 8.0mm diameters in a wide range of sheath materials
- A floating output with high insulation resistance is given via an insulated measuring junction
- These sensors can be UKAS calibrated
- Compression gland termination, supplied with 50mm PTFE tails
Available with the following approvals:
Protection Type | Description | Zone |
Ex nA IIC Gc | Non-Sparking (Gas) | 2 |
Ex d IIC Gb | Flameproof (Gas) | 1 |
Ex ia IIC Ga / IIIC Da | Intrinsically Safe (Gas/Dust) | 0/20 |
Ex tb IIIC Db | Enclosure (Dust) | 21 |
Ex tc IIIC Dc | Enclosure (Dust) | 22 |